Tutorial to Make a Bench with the Back Door of a Car, making a bench with the back door of a car can be an interesting and creative project.
All the parts needed to mount it on the wall…
- 2- 2 1/2″ X 8″ Stove Bolts
- 2- 20″ X 1 1/2″ angle iron
- 1- 6′ X 1 1/2″ angle iron
- 1- 6′ X 1/8″ pipe or 1/2″ rebar
- 2- medium snap rings
- 4- 1/2″ flat washers
- 1- 1 1/2″ X 1/4-20 allen head bolt
Instructions:
#1:
Once both ends are drilled, place the tailgate and angles flat on the table or floor for easy assembly.
#2:
Place a flat washer on one end of the pipe and drill a hole through the pipe with a 1/8″ drill bit.
#3:
I then went to the other side of the wall and marked the long piece of angle iron according to the bolts I had just pushed through the wall. then I drilled it and mounted it on the 2 studs and tightened it to the wall. This is where the posts were placed on each end of the clamp, which was ideal.
#4:
Back outside, I connected the wires from the angle iron to the tailgate on both ends.
#5:
I then closed the tailgate with the Allen bolt between the angle iron and the truck latch pin. I marked the spot on the angle, then drove 1/4-20 threads into the angle iron and installed the allen bolt there.
#6:
The tailgate now clips against the wall with the original tailgate handle.
18 Ideas of How to Make a Bench with the Back Door of a Car
#1:
#2:
#3:
#4:
#5:
#6:
#7:
#8:
#9:
#10:
#11:
#12:
#13:
#14:
#15:
#16:
#17:
#18:
Don't forget to follow us on our social networks and also for more Tutorial to Make a Bench with the Back Door of a Car!
Also don't forget to share this information with your friends and family.
Continue reading and also visit Fantastic Children's Bed Designs